| ||||||
Specifications
Product Type: Starter
Other Part #: 17942,3362019A
Design / Type: PMGR
Voltage: 12
KW: 1.8
Rotation: CW
Tooth Count: 13
Fitment
Make | Model | Year | Engine |
Nissan | Frontier | 2005-2019 | V6 4.0L |
Nissan | Pathfinder | 2005-2010 | V6 4.0L |
Nissan | Pathfinder | 2012 | V6 4.0L |
Nissan | Xterra | 2005-2014 | V6 4.0L |
Suzuki | Equator | 2009-2012 | V6 4.0L |
Package included:
1 x starter
Fault check:
The starter often has failures and phenomena that cannot rotate or rotate slowly. In this case, check the following aspects:
1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly.
2. The starter thread is loose or off, and the switch or adsorption switch fails.
3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier.
4. Excitation coil or armature coil is short-circuited or disconnected.
5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance
In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed
5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter:
There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter
(1).Disconnect the battery.
You will not need to remove the positive cable on the battery.
Always disconnect the battery before servicing the electrical system in your vehicle.
(2).Jack up the vehicle if need be.
Ensure you jack the vehicle up on firm, level ground.
(3).Locate the starter.
The smaller cylinder attached to the starter is the starter solenoid.
A wire should run directly from the positive terminal on the battery or from the fuse box under the hood to the top terminal on the starter solenoid.
(4).Disconnect the wiring to the solenoid.
In some cases, it may just be clips you need to disconnect for the wiring.
On some starters, you will need to loosen bolts or screws that hold the wires in place.
(5).Remove the starter retaining bolts then the starter.
Be sure to use the correct size socket, otherwise you risk damaging the bolts.
(6).Compare the new starter to the old one. Slide the starter into place.
If the two starters don’t look mostly identical, it may not be the correct starter for your vehicle.
New starter solenoids often come with four terminals, but can be used with only two.
Part 2: Installing a New Starter
(7).Insert the starter retainer bolts.
If the bolt does not thread properly, unscrew it and try again.
Make sure the bolts are tight so they can’t vibrate loose while the engine is running.
(8).Connect the wiring to the starter solenoid.
With the starter secured in place, reconnect the wiring you disconnected from the old starter onto the terminals on the new one. If your new solenoid has four terminals but your old one had two, only utilize the top and bottom terminal on the new solenoid. If your old one had four and the new one does as well, connect them to the same terminals they were connected to on the old one.
(9).Reconnect the battery.
With the starter installed and wired, reconnect the black cable to the negative terminal on the battery and tighten it in place. Insert the key into the ignition and attempt to start the vehicle.
If the vehicle fails to start with the new starter in place, ensure the battery is fully charged.
(10).Listen to the vehicle as you attempt to start it.
As you turn the key in the ignition, listen for the sounds the engine makes to help determine if you have an issue with your starter. If the engine makes no sound whatsoever, or you hear only a faint clicking, it may be because there isn’t enough power reaching the electric starter motor.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery.
A weak connection from the battery can prevent the engine from starting.
Wear gloves when cleaning battery terminals to avoid getting battery acid on your skin.
If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
If the test light does not light up, it means power is not reaching the starter motor due to a faulty solenoid or a dead battery.
If the test light does light up, it means the solenoid is good, but the starter itself may have failed.
Frequently Asked Questions:
(1).Why is my car starter burning out?
You likely cranked the starter for too long.
(2).I have to change the starter fairly often in my car. What could be causing this?
A leak of some sort could be fouling the starter if fluid is dripping on it. If that's the case,
replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to?
He black wire can be commonly associated with the wire that connects the battery to the ignition.
If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box?
How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things.
Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like?
In my case, there was very little noise when the ignition was turned, and all that was heard was a distinctive click.
One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
No. It's your flywheel. When you start your car the grinding noise would be your flywheel that's connected to the starter.
Item Specifics | |
---|---|
Brand | KAC |
Number of Teeth | 13 |
Type | Starter Motor |
Voltage | 12 V |
Power Rating | 1.8 kW |
Features | Clockwise Rotation |
Manufacturer Part Number | THO228237 |
OE/OEM Part Number | 17942 |
Manufacturer Warranty | Lifetime |
Interchange Part Number | 17942N |
Superseded Part Number | 23300-EA200, 23300-EA20A, 23300-EA20AR |
California Prop 65 Warning | Yes |
Fitment Type | Direct Replacement |
Compatible Makes | Nissan, Suzuki |
Model | Frontier, Pathfinder, Xterra, Equator |
Year | 2015-2019 |
Engine | V6 4.0L |
Note | 1.8KW, 12 Volt, CW, 13 Teeth |
UPC | 997751228237 |
MPN | THO228237 |
We only accept Paypal .
Payment is expected within 4 days from the end of the auction.
We send all the items are based on your paypal address.
Therefore, please make sure your paypal address is valid
ShippingWe only ship this item to United States !
1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number.
2. Please check your shipping address carefully before checkout, it can't be changed if order completed.
3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days.
4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible
Returns1. offers lifetime warranty .
Disclaimer:Our warranty covers the replacement of the part only, DOSE NOT COVER any associated costs in regards to labor or any other expenses incurred or associated with the purchase of the part.
2.We offer free return & money back guarantee.
If you are not satisfied with your purchase for any reasons, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.)
3.If you don't return goods within 60 days from date of purchase, your right to cancel will be revoked.
Any items damaged because of incorrect installation will not be refunded. Please contact us for return or troubleshooting help prior to returning any products.
Contact UsPlease leave five stars positive feedback positive comment and Five-Stars.
Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything,
communication Please!
(NO ) Three stars is LOW star, NO 1,2,3 stars PLEASE!
(YES ) Please give us Five-star!
QuestionStep 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message . NO others please!
I have a question about using my item or I want to send the seller a message(0)(YES )
I did not receive my item(2)(NO )
I receive an item that was not as described(1)(NO )
Step 3: Describe your question clearly; we will give you the best solution
1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
<p style="font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-size: 10px; font-family: " open="" sans",="" 微软雅黑,="" "microsoft="" yahei",="" 微軟正黑體,="" jhenghei",="" arial,="" helvetica,="" sans-serif,="" verdana;"="">2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications.
DESCRIPTION PAYMENT SHIPPING RETURN POLICY CONTACT US |
Shop Category Store Home
Starters
Alternator
Bumpers & Parts
Headlight Assembly
Radiator
Other Hot Item
|
Starter For Nissan Pathfinder 2005-2012 4.0L Nissan Xterra M1TA0071ZC 410-48112
Specifications Product Type: Starter Other Part #: 17942,3362019A Design / Type: PMGR Voltage: 12 KW: 1.8 Rotation: CW Tooth Count: 13
Fitment
Package included:
Fault check: 1. The battery has no electricity or the electricity is weak, so the starter cannot rotate or rotate slowly. 2. The starter thread is loose or off, and the switch or adsorption switch fails. 3. The brush is worn out or the brush surface is not correct, and the spring is weak, resulting in poor contact of the rectifier. 4. Excitation coil or armature coil is short-circuited or disconnected. 5. The rectifier is fouled and the mica sheet is protruding, causing poor contact between the brush and the rectifier.Organization maintenance In the process of starting the engine, the starter must draw in 344~400Ah from the battery. Therefore, in order to prevent the battery from over-current or damage, the starting time should not exceed 5s. In winter, it is easy to start difficult to start. Multiple starting times should not be too long, and appropriate intervals should be left in each starting.
How to Install a Car Starter: There’s never a convenient time for your vehicle’s starter to fail. A car starter's job is to kick over the engine in your car so your vehicle starts.When you find yourself with a vehicle that won’t start, there are a number of a number of issues that may be the culprit,but once you’ve narrowed it down to a faulty starter, you can replace it using just common hand tools.
Part 1: Removing a Bad Starter (1).Disconnect the battery.
(2).Jack up the vehicle if need be.
(3).Locate the starter.
(4).Disconnect the wiring to the solenoid.
(5).Remove the starter retaining bolts then the starter.
(6).Compare the new starter to the old one. Slide the starter into place.
Part 2: Installing a New Starter (7).Insert the starter retainer bolts.
(8).Connect the wiring to the starter solenoid.
(9).Reconnect the battery.
(10).Listen to the vehicle as you attempt to start it.
(11).Ensure the battery terminals are clean and secure.Charge your vehicle’s battery. If you suspect the battery may simply be low on power, try charging it using either a trickle charger or another vehicle to jump start it. Be sure to connect the red cable to the positive terminal on each vehicle and the black to the negative.
(12).Check to see the starter solenoid is bad.
Frequently Asked Questions: (1).Why is my car starter burning out?
(2).I have to change the starter fairly often in my car. What could be causing this? replacing the starter doesn't fix the leak so it's only a matter of time before the new starter fails.
(3).What is the black wire connected to? If this is not the wire that you are referring to then it could be a random wire that has been detached from your fuse box? How big is this wire? If it is rather stout then that would be your battery cables. If it is a small wire then it could be several different things. Follow it and find the origin of the wire, it could be a simple fix just take a look at it.
(4).What does a bad starter sound like? One really common sign is if you see any smoke coming from the starter.
(5).If my car is grinding when I turn the key, does that mean I have a bad starter?
We only accept Paypal . Payment is expected within 4 days from the end of the auction. We send all the items are based on your paypal address. Therefore, please make sure your paypal address is valid We only ship this item to United States ! 1. We ship to your eBay address. Each package will be shipped by UPS or Fedex with tracking number. 2. Please check your shipping address carefully before checkout, it can't be changed if order completed. 3. Ship within 1 business day once payment completed. Orders placed on weekend will be shipped within 3 days. 4. Seriously promise: Refund or resend will be offered if item still not arrive in 7-10 business days. Just send us an email ,we will give you a satisfied solution as soon as possible 1. offers lifetime warranty . Disclaimer:Our warranty covers the replacement of the part only, DOSE NOT COVER any associated costs in regards to labor or any other expenses incurred or associated with the purchase of the part. If you are not satisfied with your purchase for any reasons, you can return the item for refund or replacement/exchange. All returns must include the original packaging. (Please refer to our return policy for details.) Any items damaged because of incorrect installation will not be refunded. Please contact us for return or troubleshooting help prior to returning any products. Please leave five stars positive feedback positive comment and Five-Stars. Contact us if you have any question, Give us a chance to serve you, negative feedback could not solve anything, communication Please! (NO ) Three stars is LOW star, NO 1,2,3 stars PLEASE! (YES ) Please give us Five-star! Step 2: Select the 1st topic: I have a question about using my item or I want to send the seller a message . NO others please! I have a question about using my item or I want to send the seller a message(0)(YES ) I did not receive my item(2)(NO ) I receive an item that was not as described(1)(NO ) Step 3: Describe your question clearly; we will give you the best solution 1. We have always been trying to provide the best service and reliable product for every customer, However , accident may happen sometimes please contact us solve any issue before leaving a negative feedback.
<p style="font-style: normal; font-variant-ligatures: normal; font-variant-caps: normal; font-weight: 400; font-size: 10px; font-family: " open="" sans",="" 微软雅黑,="" "microsoft="" yahei",="" 微軟正黑體,="" jhenghei",="" arial,="" helvetica,="" sans-serif,="" verdana;"="">2. We have a very professional and attentive customer support team. Welcome to contact us any time and any issue will be solved by our great communications. |